2
0
mirror of https://github.com/m-labs/artiq.git synced 2024-12-25 19:28:26 +08:00

doc: clean up artiq-dev installation instructions

Add a heading to the openocd setup instruction so that it is
clearly distinguishable from the openocd installation. Otherwise people
"re-install" openocd the wrong way.
This commit is contained in:
Robert Jördens 2017-12-07 12:24:32 +01:00
parent 69b2d1abfc
commit 63f65b6e53
2 changed files with 7 additions and 5 deletions

View File

@ -27,7 +27,7 @@ ARTIQ Anaconda development environment
$ git clone --recursive https://github.com/m-labs/artiq ~/artiq-dev/artiq $ git clone --recursive https://github.com/m-labs/artiq ~/artiq-dev/artiq
$ cd ~/artiq-dev/artiq $ cd ~/artiq-dev/artiq
Add ``-b release-X`` to the ``git clone`` command if you are building a stable branch of ARTIQ (the default will fetch the development ``master`` branch). Add ``-b release-X`` to the ``git clone`` command if you are building a stable branch of ARTIQ. Replace ``X`` with the major release. The default will fetch the development ``master`` branch.
3. :ref:`Install Anaconda or Miniconda <install-anaconda>` 3. :ref:`Install Anaconda or Miniconda <install-anaconda>`
4. Create and activate a conda environment named ``artiq-dev`` and install the ``artiq-dev`` package which pulls in all the packages required to develop ARTIQ:: 4. Create and activate a conda environment named ``artiq-dev`` and install the ``artiq-dev`` package which pulls in all the packages required to develop ARTIQ::
@ -37,10 +37,9 @@ ARTIQ Anaconda development environment
$ pip install -e . $ pip install -e .
6. :ref:`Install Vivado <install-xilinx>` 6. :ref:`Install Vivado <install-xilinx>`
7. :ref:`Obtain and install the JTAG SPI flash proxy bitstream <install-bscan-spi>` 7. :ref:`Configure OpenOCD <setup-openocd>`
8. :ref:`Configure OpenOCD <setup-openocd>` 8. :ref:`Build target binaries <build-target-binaries>`
9. :ref:`Build target binaries <build-target-binaries>` 9. :ref:`Flash target binaries <flash-target-binaries>`
10. :ref:`Flash target binaries <flash-target-binaries>`
.. _install-from-source: .. _install-from-source:

View File

@ -112,6 +112,9 @@ The ``artiq`` or ``artiq-dev`` conda packages install ``openocd`` automatically
.. _setup-openocd: .. _setup-openocd:
Configuring OpenOCD
^^^^^^^^^^^^^^^^^^^
Some additional steps are necessary to ensure that OpenOCD can communicate with the FPGA board. Some additional steps are necessary to ensure that OpenOCD can communicate with the FPGA board.
On Linux, first ensure that the current user belongs to the ``plugdev`` group. If it does not, run ``sudo adduser $USER plugdev`` and relogin. Afterwards:: On Linux, first ensure that the current user belongs to the ``plugdev`` group. If it does not, run ``sudo adduser $USER plugdev`` and relogin. Afterwards::