artiq_flash: fix Metlino support

This commit is contained in:
Sebastien Bourdeauducq 2019-05-19 16:37:40 +08:00
parent 88b6496c8c
commit 34c61db790
1 changed files with 36 additions and 3 deletions

View File

@ -223,7 +223,7 @@ class ProgrammerXC7(Programmer):
"xc7_program xc7.tap")
class ProgrammerSaymaMetlino(Programmer):
class ProgrammerSayma(Programmer):
_sector_size = 0x10000
def __init__(self, client, preinit_script):
@ -260,6 +260,39 @@ class ProgrammerSaymaMetlino(Programmer):
add_commands(self._script, "xcu_program xcu.tap")
class ProgrammerMetlino(Programmer):
_sector_size = 0x10000
def __init__(self, client, preinit_script):
Programmer.__init__(self, client, preinit_script)
add_commands(self._board_script,
"source {}".format(self._transfer_script("fpga/xilinx-xadc.cfg")),
"interface ftdi",
"ftdi_device_desc \"Quad RS232-HS\"",
"ftdi_vid_pid 0x0403 0x6011",
"ftdi_channel 0",
# EN_USB_JTAG on ADBUS7: out, high
# nTRST on ADBUS4: out, high, but R46 is DNP
"ftdi_layout_init 0x0098 0x008b",
"reset_config none",
"adapter_khz 5000",
"transport select jtag",
"set CHIP XCKU040",
"source {}".format(self._transfer_script("cpld/xilinx-xcu.cfg")))
self.add_flash_bank("spi0", "xcu", index=0)
self.add_flash_bank("spi1", "xcu", index=1)
add_commands(self._script, "echo \"AMC FPGA XADC:\"", "xadc_report xcu.tap")
def load_proxy(self):
self.load(find_proxy_bitfile("bscan_spi_xcku040-sayma.bit"), pld=0)
def start(self):
add_commands(self._script, "xcu_program xcu.tap")
def main():
args = get_argparser().parse_args()
init_logger(args)
@ -273,7 +306,7 @@ def main():
"firmware": ("spi0", 0x450000),
},
"sayma": {
"programmer": ProgrammerSaymaMetlino,
"programmer": ProgrammerSayma,
"gateware": ("spi0", 0x000000),
"bootloader": ("spi1", 0x000000),
"storage": ("spi1", 0x040000),
@ -281,7 +314,7 @@ def main():
"rtm_gateware": ("spi1", 0x200000),
},
"metlino": {
"programmer": ProgrammerSaymaMetlino,
"programmer": ProgrammerMetlino,
"gateware": ("spi0", 0x000000),
"bootloader": ("spi1", 0x000000),
"storage": ("spi1", 0x040000),