mirror of https://github.com/m-labs/artiq.git
doc: 'Getting started with core device' manual page edit (#2431)
This commit is contained in:
architeuthidae
GitHub
parent
f432529014
commit
2c945f260e
|
|
@ -21,16 +21,18 @@ As a very first step, we will turn on a LED on the core device. Create a file ``
|
|||
self.core.reset()
|
||||
self.led.on()
|
||||
|
||||
The central part of our code is our ``LED`` class, which derives from :class:`artiq.language.environment.EnvExperiment`. Among other features, :class:`~artiq.language.environment.EnvExperiment` calls our :meth:`~artiq.language.environment.Experiment.build` method and provides the :meth:`~artiq.language.environment.HasEnvironment.setattr_device` method that interfaces to the device database to create the appropriate device drivers and make those drivers accessible as ``self.core`` and ``self.led``. The :func:`~artiq.language.core.kernel` decorator (``@kernel``) tells the system that the :meth:`~artiq.language.environment.Experiment.run` method must be compiled for and executed on the core device (instead of being interpreted and executed as regular Python code on the host). The decorator uses ``self.core`` internally, which is why we request the core device using :meth:`~artiq.language.environment.HasEnvironment.setattr_device` like any other.
|
||||
The central part of our code is our ``LED`` class, which derives from :class:`artiq.language.environment.EnvExperiment`. Among other features, :class:`~artiq.language.environment.EnvExperiment` calls our :meth:`~artiq.language.environment.Experiment.build` method and provides the :meth:`~artiq.language.environment.HasEnvironment.setattr_device` method that interfaces with the device database to create the appropriate device drivers and make those drivers accessible as ``self.core`` and ``self.led``. The :func:`~artiq.language.core.kernel` decorator (``@kernel``) tells the system that the :meth:`~artiq.language.environment.Experiment.run` method must be compiled for and executed on the core device (instead of being interpreted and executed as regular Python code on the host). The decorator uses ``self.core`` internally, which is why we request the core device using :meth:`~artiq.language.environment.HasEnvironment.setattr_device` like any other.
|
||||
|
||||
You will need to supply the correct device database for your core device; it is generated by a Python script typically called ``device_db.py`` (see also :ref:`device-db`). If you purchased a system from M-Labs, the device database is provided either on the USB stick or inside ~/artiq on the NUC; otherwise, you can also find examples in the ``examples`` folder of ARTIQ, sorted inside the corresponding subfolder for your core device. Copy ``device_db.py`` into the same directory as ``led.py`` (or use the ``--device-db`` option of ``artiq_run``). The field ``core_addr``, placed at the top of the file, needs to match the IP address of your core device so your computer can communicate with it. If you purchased a pre-assembled system it is normally already set correctly.
|
||||
It is important that you supply the correct device database for your system configuration; it is generated by a Python script typically called ``device_db.py`` (see also :ref:`the device database <device-db>`). If you purchased a system from M-Labs, the ``device_db.py`` for your system will normally already have been provided to you (either on the USB stick, inside ``~/artiq`` on the NUC, or by email). If you have the JSON description file for your system on hand, you can use the ARTIQ front-end tool ``artiq_ddb_template`` to generate a matching device database file. Otherwise, you can also find examples in the ``examples`` folder of ARTIQ (sorted in corresponding subfolders per core device) which you can edit to match your system.
|
||||
|
||||
.. note::
|
||||
To access the examples, you can find where the ARTIQ package is installed on your machine with: ::
|
||||
|
||||
python3 -c "import artiq; print(artiq.__path__[0])"
|
||||
|
||||
Run your code using ``artiq_run``, which is part of the ARTIQ front-end tools: ::
|
||||
Make sure ``device_db.py`` is in the same directory as ``led.py``. The field ``core_addr``, placed at the top of the file, needs to match the current IP address of your core device in order for your host machine to contact it. If you purchased a pre-assembled system and haven't changed the IP address it is normally already set correctly.
|
||||
|
||||
Run your code using ``artiq_run``, which is one of the ARTIQ front-end tools: ::
|
||||
|
||||
$ artiq_run led.py
|
||||
|
||||
|
|
@ -39,9 +41,9 @@ The process should terminate quietly and the LED of the device should turn on. C
|
|||
Host/core device interaction (RPC)
|
||||
----------------------------------
|
||||
|
||||
A method or function running on the core device (which we call a "kernel") may communicate with the host by calling non-kernel functions that may accept parameters and may return a value. The "remote procedure call" (RPC) mechanisms handle automatically the communication between the host and the device of which function to call, with which parameters, and what the returned value is.
|
||||
A method or function running on the core device (which we call a "kernel") may communicate with the host by calling non-kernel functions that may accept parameters and may return a value. The "remote procedure call" (RPC) mechanisms automatically handle the communication between the host and the device, conveying between them what function to call, what parameters to call it with, and the resulting value, once returned.
|
||||
|
||||
Modify the code as follows: ::
|
||||
Modify ``led.py`` as follows: ::
|
||||
|
||||
def input_led_state() -> TBool:
|
||||
return input("Enter desired LED state: ") == "1"
|
||||
|
|
@ -69,15 +71,11 @@ You can then turn the LED off and on by entering 0 or 1 at the prompt that appea
|
|||
$ artiq_run led.py
|
||||
Enter desired LED state: 0
|
||||
|
||||
What happens is the ARTIQ compiler notices that the :meth:`input_led_state` function does not have a ``@kernel`` decorator (:func:`~artiq.language.core.kernel`) and thus must be executed on the host. When the core device calls it, it sends a request to the host to execute it. The host displays the prompt, collects user input, and sends the result back to the core device, which sets the LED state accordingly.
|
||||
What happens is that the ARTIQ compiler notices that the :meth:`input_led_state` function does not have a ``@kernel`` decorator (:func:`~artiq.language.core.kernel`) and thus must be executed on the host. When the function is called on the core device, it sends a request to the host, which executes it. The core device waits until the host returns, and then continues the kernel; in this case, the host displays the prompt, collects user input, and the core device sets the LED state accordingly.
|
||||
|
||||
RPC functions must always return a value of the same type. When they return a value that is not ``None``, the compiler should be informed in advance of the type of the value, which is what the ``-> TBool`` annotation is for.
|
||||
|
||||
Without the :meth:`~artiq.coredevice.core.Core.break_realtime` call, the RTIO events emitted by :func:`self.led.on()` or :func:`self.led.off()` would be scheduled at a fixed and very short delay after entering :meth:`~artiq.language.environment.Experiment.run()`.
|
||||
These events would fail because the RPC to :meth:`input_led_state()` can take an arbitrary amount of time and therefore the deadline for submission of RTIO events would have long passed when :func:`self.led.on()` or :func:`self.led.off()` are called.
|
||||
The :meth:`~artiq.coredevice.core.Core.break_realtime` call is necessary to waive the real-time requirements of the LED state change.
|
||||
It advances the timeline far enough to ensure that events can meet the submission deadline.
|
||||
The return type of all RPC functions must be known in advance. If the return value is not ``None``, the compiler requires a type annotation, like ``-> TBool`` in the example above.
|
||||
|
||||
Without the :meth:`~artiq.coredevice.core.Core.break_realtime` call, the RTIO events emitted by :func:`self.led.on()` or :func:`self.led.off()` would be scheduled at a fixed and very short delay after entering :meth:`~artiq.language.environment.Experiment.run()`. These events would fail because the RPC to :meth:`input_led_state()` can take an arbitrarily long amount of time, and therefore the deadline for the submission of RTIO events would have long passed when :func:`self.led.on()` or :func:`self.led.off()` are called (that is, the ``rtio_counter`` wall clock will have advanced far ahead of the timeline cursor ``now``, and an :exc:`~artiq.coredevice.exceptions.RTIOUnderflow` would result; see :ref:`artiq-real-time-i-o-concepts` for the full explanation of wall clock vs. timeline.) The :meth:`~artiq.coredevice.core.Core.break_realtime` call is necessary to waive the real-time requirements of the LED state change. Rather than delaying by any particular time interval, it reads ``rtio_counter`` and moves up the ``now`` cursor far enough to ensure it's once again safely ahead of the wall clock.
|
||||
|
||||
Real-time Input/Output (RTIO)
|
||||
-----------------------------
|
||||
|
|
@ -112,13 +110,13 @@ There are no input-only TTL channels.
|
|||
The experiment then drives one million 2 µs long pulses separated by 2 µs each.
|
||||
Connect an oscilloscope or logic analyzer to TTL0 and run ``artiq_run.py rtio.py``.
|
||||
Notice that the generated signal's period is precisely 4 µs, and that it has a duty cycle of precisely 50%.
|
||||
This is not what you would expect if the delay and the pulse were implemented with register-based general purpose input output (GPIO) that is CPU-controlled.
|
||||
The signal's period would depend on CPU speed, and overhead from the loop, memory management, function calls, etc, all of which are hard to predict and variable.
|
||||
This is not what one would expect if the delay and the pulse were implemented with register-based general purpose input output (GPIO) that is CPU-controlled.
|
||||
The signal's period would depend on CPU speed, and overhead from the loop, memory management, function calls, etc., all of which are hard to predict and variable.
|
||||
Any asymmetry in the overhead would manifest itself in a distorted and variable duty cycle.
|
||||
|
||||
Instead, inside the core device, output timing is generated by the gateware and the CPU only programs switching commands with certain timestamps that the CPU computes.
|
||||
|
||||
This guarantees precise timing as long as the CPU can keep generating timestamps that are increasing fast enough. In case it fails to do that (and attempts to program an event with a timestamp smaller than the current RTIO clock timestamp), a :exc:`~artiq.coredevice.exceptions.RTIOUnderflow` exception is raised. The kernel causing it may catch it (using a regular ``try... except...`` construct), or it will be propagated to the host.
|
||||
This guarantees precise timing as long as the CPU can keep generating timestamps that are increasing fast enough. In the case that it fails to do so (and attempts to program an event with a timestamp smaller than the current RTIO clock timestamp), :exc:`~artiq.coredevice.exceptions.RTIOUnderflow` is raised. The kernel causing it may catch it (using a regular ``try... except...`` construct), or allow it to propagate to the host.
|
||||
|
||||
Try reducing the period of the generated waveform until the CPU cannot keep up with the generation of switching events and the underflow exception is raised. Then try catching it: ::
|
||||
|
||||
|
|
@ -147,23 +145,33 @@ Try reducing the period of the generated waveform until the CPU cannot keep up w
|
|||
Parallel and sequential blocks
|
||||
------------------------------
|
||||
|
||||
It is often necessary that several pulses overlap one another. This can be expressed through the use of ``with parallel`` constructs, in which the events generated by the individual statements are executed at the same time. The duration of the ``parallel`` block is the duration of its longest statement.
|
||||
It is often necessary for several pulses to overlap one another. This can be expressed through the use of ``with parallel`` constructs, in which the events generated by the individual statements are executed at the same time. The duration of the ``parallel`` block is the duration of its longest statement.
|
||||
|
||||
Try the following code and observe the generated pulses on a 2-channel oscilloscope or logic analyzer: ::
|
||||
|
||||
for i in range(1000000):
|
||||
with parallel:
|
||||
self.ttl0.pulse(2*us)
|
||||
self.ttl1.pulse(4*us)
|
||||
delay(4*us)
|
||||
from artiq.experiment import *
|
||||
|
||||
class Tutorial(EnvExperiment):
|
||||
def build(self):
|
||||
self.setattr_device("core")
|
||||
self.setattr_device("ttl0")
|
||||
self.setattr_device("ttl1")
|
||||
|
||||
@kernel
|
||||
def run(self):
|
||||
self.core.reset()
|
||||
for i in range(1000000):
|
||||
with parallel:
|
||||
self.ttl0.pulse(2*us)
|
||||
self.ttl1.pulse(4*us)
|
||||
delay(4*us)
|
||||
|
||||
ARTIQ can implement ``with parallel`` blocks without having to resort to any of the typical parallel processing approaches.
|
||||
It simply remembers the position on the timeline when entering the ``parallel`` block and then seeks back to that position after submitting the events generated by each statement.
|
||||
In other words, the statements in the ``parallel`` block are actually executed sequentially, only the RTIO events generated by them are scheduled to be executed in parallel.
|
||||
Note that if a statement takes a lot of CPU time to execute (this different from the events scheduled by a statement taking a long time), it may cause a subsequent statement to miss the deadline for timely submission of its events.
|
||||
This then causes a :exc:`~artiq.coredevice.exceptions.RTIOUnderflow` exception to be raised.
|
||||
Note that accordingly if a statement takes a lot of CPU time to execute (which is different from -- and has nothing to do with! -- the events *scheduled* by the statement taking a long time), it may cause a subsequent statement to miss the deadline for timely submission of its events (and raise :exc:`~artiq.coredevice.exceptions.RTIOUnderflow`), while earlier statements in the parallel block would have submitted their events without problems.
|
||||
|
||||
Within a parallel block, some statements can be made sequential again using a ``with sequential`` construct. Observe the pulses generated by this code: ::
|
||||
Within a parallel block, some statements can be scheduled sequentially again using a ``with sequential`` block. Observe the pulses generated by this code: ::
|
||||
|
||||
for i in range(1000000):
|
||||
with parallel:
|
||||
|
|
@ -174,11 +182,11 @@ Within a parallel block, some statements can be made sequential again using a ``
|
|||
self.ttl1.pulse(4*us)
|
||||
delay(4*us)
|
||||
|
||||
Particular care needs to be taken when working with ``parallel`` blocks in cases where a large number of RTIO events are generated as it possible to create sequencing errors (`RTIO sequence error`). Sequence errors do not halt execution of the kernel for performance reasons and instead are reported in the core log. If the ``aqctl_corelog`` process has been started with ``artiq_ctlmgr``, then these errors will be posted to the master log. However, if an experiment is executed through ``artiq_run``, these errors will not be visible outside of the core log.
|
||||
Particular care needs to be taken when working with ``parallel`` blocks which generate large numbers of RTIO events, as it is possible to create sequence errors. A sequence error is caused when the scalable event dispatcher (SED) cannot queue an RTIO event due to its timestamp being the same as or earlier than another event in its queue. By default, the SED has 8 lanes, which suffice in most cases to avoid sequence errors; however, if many (>8) events are queued with interlaced timestamps the problem can still surface. See :ref:`sequence-errors`.
|
||||
|
||||
A sequence error is caused when the scalable event dispatcher (SED) cannot queue an RTIO event due to its timestamp being the same as or earlier than another event in its queue. By default, the SED has 8 lanes which allows ``parallel`` events to work without sequence errors in most cases, however if many (>8) events are queued with conflicting timestamps this error can surface.
|
||||
Note that for performance reasons sequence errors do not halt execution of the kernel. Instead, they are reported in the core log. If the ``aqctl_corelog`` process has been started with ``artiq_ctlmgr``, then these errors will be posted to the master log. If an experiment is executed through ``artiq_run``, the errors will only be visible in the core log.
|
||||
|
||||
These errors can usually be overcome by reordering the generation of the events. Alternatively, the number of SED lanes can be increased in the gateware.
|
||||
Sequence errors can usually be overcome by reordering the generation of the events (again, different from and unrelated to reordering the events themselves). Alternatively, the number of SED lanes can be increased in the gateware.
|
||||
|
||||
.. _rtio-analyzer-example:
|
||||
|
||||
|
|
@ -203,13 +211,12 @@ The core device records the real-time I/O waveforms into a circular buffer. It i
|
|||
rtio_log("ttl0", "i", i)
|
||||
delay(...)
|
||||
|
||||
Afterwards, the recorded data can be extracted and written to a VCD file using ``artiq_coreanalyzer -w rtio.vcd`` (see: :ref:`core-device-rtio-analyzer-tool`). VCD files can be viewed using third-party tools such as GtkWave.
|
||||
|
||||
Afterwards, the recorded data can be extracted and written to a VCD file using ``artiq_coreanalyzer -w rtio.vcd`` (see :ref:`core-device-rtio-analyzer-tool`). VCD files can be viewed using third-party tools such as GtkWave.
|
||||
|
||||
Direct Memory Access (DMA)
|
||||
--------------------------
|
||||
|
||||
DMA allows you to store fixed sequences of pulses in system memory, and have the DMA core in the FPGA play them back at high speed. Pulse sequences that are too fast for the CPU (i.e. would cause RTIO underflows) can still be generated using DMA. The only modification of the sequence that the DMA core supports is shifting it in time (so it can be played back at any position of the timeline), everything else is fixed at the time of recording the sequence.
|
||||
DMA allows for storing fixed sequences of RTIO events in system memory and having the DMA core in the FPGA play them back at high speed. Provided that the specifications of a desired event sequence are known far enough in advance, and no other RTIO issues (collisions, sequence errors) are provoked, even extremely fast and detailed event sequences are always possible to generate and execute. However, if they are time-consuming for the CPU to generate, they may require very large amounts of positive slack in order to allow the CPU enough time to complete the generation before the wall clock 'catches up' (that is, without running into RTIO underflows). A better option is to record these sequences to the DMA core. Once recorded, events sequences are fixed and cannot be modified, but can be safely replayed at any position in the timeline, potentially repeatedly.
|
||||
|
||||
Try this: ::
|
||||
|
||||
|
|
@ -244,12 +251,14 @@ Try this: ::
|
|||
# each playback advances the timeline by 50*(100+100) ns
|
||||
self.core_dma.playback_handle(pulses_handle)
|
||||
|
||||
For more documentation on the methods used, see the :mod:`artiq.coredevice.dma` reference.
|
||||
|
||||
Distributed Direct Memory Access (DDMA)
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
By default on DRTIO systems, all events recorded by the DMA core are kept and played back on the master.
|
||||
|
||||
With distributed DMA, RTIO events that should be played back on remote destinations, are distributed to the corresponding satellites. In some cases (typically, large buffers on several satellites with high event throughput), it allows for better performance and higher bandwidth, as the RTIO events do not have to be sent over the DRTIO link(s) during playback.
|
||||
With distributed DMA, RTIO events that should be played back on remote destinations are distributed to the corresponding satellites. In some cases (typically, large buffers on several satellites with high event throughput), it allows for better performance and higher bandwidth, as the RTIO events do not have to be sent over the DRTIO link(s) during playback.
|
||||
|
||||
To enable distributed DMA, simply provide an ``enable_ddma=True`` argument for the :meth:`~artiq.coredevice.dma.CoreDMA.record` method - taking a snippet from the previous example: ::
|
||||
|
||||
|
|
@ -262,28 +271,26 @@ To enable distributed DMA, simply provide an ``enable_ddma=True`` argument for t
|
|||
self.ttl0.pulse(100*ns)
|
||||
delay(100*ns)
|
||||
|
||||
This argument is ignored on standalone systems, as it does not apply there.
|
||||
In standalone systems this argument is ignored and has no effect.
|
||||
|
||||
Enabling DDMA on a purely local sequence on a DRTIO system introduces an overhead during trace recording which comes from additional processing done on the record, so careful use is advised.
|
||||
|
||||
Due to the extra time that communicating with relevant satellites takes, an additional delay before playback may be necessary to prevent a :exc:`~artiq.coredevice.exceptions.RTIOUnderflow` when playing back a DDMA-enabled sequence.
|
||||
Enabling DDMA on a purely local sequence on a DRTIO system introduces an overhead during trace recording which comes from additional processing done on the record, so careful use is advised. Due to the extra time that communicating with relevant satellites takes, an additional delay before playback may be necessary to prevent a :exc:`~artiq.coredevice.exceptions.RTIOUnderflow` when playing back a DDMA-enabled sequence.
|
||||
|
||||
Subkernels
|
||||
----------
|
||||
|
||||
Subkernels refer to kernels running on a satellite device. This allows you to offload some of the processing and control over remote RTIO devices, freeing up resources on the master.
|
||||
Subkernels refers to kernels running on a satellite device. This allows offloading some processing and control over remote RTIO devices, freeing up resources on the master.
|
||||
|
||||
Subkernels behave in most part as regular kernels, they accept arguments and can return values. However, there are few caveats:
|
||||
Subkernels behave for the most part like regular kernels; they accept arguments and can return values. However, there are few caveats:
|
||||
|
||||
- they do not support RPCs,
|
||||
- they do not support DRTIO,
|
||||
- their return value must be fully annotated with an ARTIQ type,
|
||||
- their arguments should be annotated, and only basic ARTIQ types are supported,
|
||||
- while ``self`` is allowed, there is no attribute writeback - any changes to it will be discarded when the subkernel is done,
|
||||
- they can raise exceptions, but they cannot be caught by the master,
|
||||
- they begin execution as soon as possible when called, and they can be awaited.
|
||||
- while ``self`` is allowed, there is no attribute writeback - any changes will be discarded when the subkernel is completed,
|
||||
- they can raise exceptions, but the exceptions cannot be caught by the master (rather, they are propagated directly to the host),
|
||||
- they begin execution as soon as possible when called, and can be awaited.
|
||||
|
||||
To define a subkernel, use the subkernel decorator (``@subkernel(destination=X)``). The destination is the satellite number as defined in the routing table, and must be between 1 and 255. To call a subkernel, call it like a normal function; and to await its result, use ``subkernel_await(function, [timeout])`` built-in function.
|
||||
To define a subkernel, use the subkernel decorator (``@subkernel(destination=X)``). The destination is the satellite number as defined in the routing table, and must be between 1 and 255. To call a subkernel, call it like a normal function; and to await its result, use ``subkernel_await(function, [timeout])``.
|
||||
|
||||
For example, a subkernel performing integer addition: ::
|
||||
|
||||
|
|
@ -304,11 +311,11 @@ For example, a subkernel performing integer addition: ::
|
|||
result = subkernel_await(subkernel_add)
|
||||
assert result == 4
|
||||
|
||||
Sometimes the subkernel execution may take more time. By default, the await function will wait forever. However, if timeout is needed it can be set, as ``subkernel_await()`` accepts an optional argument. The value is interpreted in milliseconds and if it is negative, timeout is disabled.
|
||||
Sometimes subkernel execution may take large amounts of time. By default, the await function will wait as long as necessary. If a timeout is needed, it can be set using the optional argument of ``subkernel_await()``. The value given is interpreted in milliseconds. If a negative value is given, timeout is disabled.
|
||||
|
||||
Subkernels are compiled after the main kernel, and then immediately uploaded to satellites. When called, master instructs the appropriate satellite to load the subkernel into their kernel core and to run it. If the subkernel is complex, and its binary relatively big, the delay between the call and actually running the subkernel may be substantial; if that delay has to be minimized, ``subkernel_preload(function)`` should be used before the call.
|
||||
Subkernels are compiled after the main kernel and immediately uploaded to satellites. When called, the master instructs the appropriate satellite to load the subkernel into their kernel core and run it. If the subkernel is complex, and its binary relatively large, the delay between the call and actually running the subkernel may be substantial; if it's necessary to minimize this delay, ``subkernel_preload(function)`` should be used before the call.
|
||||
|
||||
While ``self`` is accepted as an argument for subkernels, it is embedded into the compiled data. Any changes made by the main kernel or other subkernels, will not be available.
|
||||
While ``self`` is accepted as an argument for subkernels, it is embedded into the compiled data. Any changes made by the main kernel or other subkernels will not be available.
|
||||
|
||||
Subkernels can call other kernels and subkernels. For a more complex example: ::
|
||||
|
||||
|
|
@ -341,17 +348,17 @@ Subkernels can call other kernels and subkernels. For a more complex example: ::
|
|||
assert result == 4
|
||||
self.pulse_ttl(20)
|
||||
|
||||
Without the preload, the delay after the core reset would need to be longer. It's still an operation that can take some time, depending on the connection. Notice that the method ``pulse_ttl()`` can be also called both within a subkernel, and on its own.
|
||||
Without the preload, the delay after the core reset would need to be longer. The operation may still take some time, depending on the connection. Notice that the method ``pulse_ttl()`` can be called both within a subkernel and on its own.
|
||||
|
||||
In general, subkernels do not have to be awaited, but awaiting is required to retrieve returned values and exceptions.
|
||||
It is not necessary for subkernels to always be awaited, but awaiting is required to retrieve returned values and exceptions.
|
||||
|
||||
.. note::
|
||||
When a subkernel is running, regardless of devices used by it, RTIO devices on that satellite are not available to the master. Control is returned to master after the subkernel finishes - to be sure that you can use the device, the subkernel should be awaited before any RTIO operations on the affected satellite are performed.
|
||||
While a subkernel is running, regardless of what devices it makes use of, none of the RTIO devices on that satellite (or on any satellites downstream) will be available to the master. Control is returned to master after the subkernel completes - to be certain a device is usable, await the subkernel before performing any RTIO operations on the affected satellites.
|
||||
|
||||
Message passing
|
||||
^^^^^^^^^^^^^^^
|
||||
|
||||
Subkernels besides arguments and returns, can also pass messages between each other or the master with built-in ``subkernel_send()`` and ``subkernel_recv()`` functions. This can be used for communication between subkernels, passing additional data, or partially computed data. Consider the following example: ::
|
||||
Apart from arguments and returns, subkernels can also pass messages between each other or the master with built-in ``subkernel_send()`` and ``subkernel_recv()`` functions. This can be used for communication between subkernels, to pass additional data, or to send partially computed data. Consider the following example: ::
|
||||
|
||||
from artiq.experiment import *
|
||||
|
||||
|
|
@ -371,10 +378,10 @@ Subkernels besides arguments and returns, can also pass messages between each ot
|
|||
result = subkernel_await(simple_self)
|
||||
assert result == 170
|
||||
|
||||
The ``subkernel_send(destination, name, value)`` function requires three arguments: destination, name of the message that will be linked with the ``subkernel_recv()``, and the passed value.
|
||||
The ``subkernel_send(destination, name, value)`` function takes three arguments: a destination, a name for the message (to be used for identification in the corresponding ``subkernel_recv()``), and the passed value.
|
||||
|
||||
The ``subkernel_recv(name, type, [timeout])`` function requires two arguments: message name (matching the name provided in ``subkernel_send``) and expected type. Optionally, it accepts a third argument - timeout for the operation in milliseconds. If the value is negative, timeout is disabled. The default value is no timeout.
|
||||
The ``subkernel_recv(name, type, [timeout])`` function requires two arguments: message name (matching exactly the name provided in ``subkernel_send``) and expected type. Optionally, it accepts a third argument, a timeout for the operation in milliseconds. If this value is negative, timeout is disabled. By default, it waits as long as necessary.
|
||||
|
||||
The "name" argument in both ``send`` and ``recv`` functions acts as a link, and must match exactly between the two for a successful message transaction. The type of the value sent by ``subkernel_send`` is checked against the type declared in ``subkernel_recv`` with the same name, to avoid misinterpretation of the data. The compiler also checks if all subkernel message names have both a sending and receiving functions to help with typos. However, it cannot help if wrong names are used - the receiver will wait only for a matching message for the duration of the timeout.
|
||||
To avoid misinterpretation of the data the compiler type-checks the value sent by ``subkernel_send`` against the type declared in ``subkernel_recv``. To guard against common errors, it also checks that all message names are used in both a sending and receiving function.
|
||||
|
||||
A message can be received only when a subkernel is running, and is put into a buffer to be taken when required - thus whatever sending order will not cause a deadlock. However, a subkernel may timeout or wait forever, if destination or names do not match (e.g. message sent to wrong destination, or under different than expected name even if types match).
|
||||
A message can only be received while a subkernel is running, and is placed into a buffer to be retrieved when required; therefore send executes independently of any receive and never deadlocks. However, a receive function may timeout or wait forever if no message with the correct name and destination is ever sent.
|
||||
|
|
@ -121,7 +121,7 @@ To track down ``RTIOUnderflows`` in an experiment there are a few approaches:
|
|||
code.
|
||||
* The :any:`integrated logic analyzer <core-device-rtio-analyzer-tool>` shows the timeline context that lead to the exception. The analyzer is always active and supports plotting of RTIO slack. RTIO slack is the difference between timeline cursor and wall clock time (``now - rtio_counter``).
|
||||
|
||||
.. _sequence_errors:
|
||||
.. _sequence-errors:
|
||||
|
||||
Sequence errors
|
||||
---------------
|
||||
|
|
|
|||
Loading…
Reference in New Issue