manual: install flash proxy before flashing bitstream/bios/runtime

This commit is contained in:
Yann Sionneau 2015-06-14 22:23:55 +02:00
parent b14ca2ecc9
commit 00c4101f12
1 changed files with 6 additions and 7 deletions

View File

@ -48,23 +48,22 @@ Preparing the core device FPGA board
You now need to flash 3 things on the FPGA board: You now need to flash 3 things on the FPGA board:
* The FPGA bitstream 1. The FPGA bitstream
* The BIOS 2. The BIOS
* The ARTIQ runtime 3. The ARTIQ runtime
To do that: * First, install the :ref:`Flash proxy <install-flash-proxy>` for your board.
* On Pipistrello board:: * Then, on Pipistrello board::
$ artiq_flash.sh -t pipistrello $ artiq_flash.sh -t pipistrello
* On KC705 board:: * or on KC705 board::
$ artiq_flash.sh $ artiq_flash.sh
Next step (for KC705) is to flash MAC and IP addresses to the board: Next step (for KC705) is to flash MAC and IP addresses to the board:
* Get the :ref:`Flash proxy <install-flash-proxy>` for your board.
* See :ref:`those instructions <flash-mac-ip-addr>` to flash MAC and IP addresses. * See :ref:`those instructions <flash-mac-ip-addr>` to flash MAC and IP addresses.
.. _install-from-sources: .. _install-from-sources: