Clock input settings improvements #152

Merged
sb10q merged 12 commits from mwojcik/artiq-zynq:clock_input_improv into master 2021-11-29 11:18:00 +08:00
4 changed files with 233 additions and 84 deletions

View File

@ -24,7 +24,7 @@ The following configuration keys are available:
- ``ip``: IPv4 address. - ``ip``: IPv4 address.
- ``ip6``: IPv6 address. - ``ip6``: IPv6 address.
- ``startup``: startup kernel in ELF format (as produced by ``artiq_compile``). - ``startup``: startup kernel in ELF format (as produced by ``artiq_compile``).
- ``rtioclk``: source of RTIO clock; valid values are ``external`` and ``internal``. - ``rtio_clock``: source of RTIO clock; valid values are ``ext0_bypass`` and ``int_125``.
- ``boot``: SD card "boot.bin" file, for replacing the boot firmware/gateware. Write only. - ``boot``: SD card "boot.bin" file, for replacing the boot firmware/gateware. Write only.
Configurations can be read/written/removed via ``artiq_coremgmt``. Config erase is Configurations can be read/written/removed via ``artiq_coremgmt``. Config erase is

View File

@ -113,8 +113,8 @@ class GenericStandalone(SoCCore):
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]") platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24") platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
self.rustc_cfg["HAS_SI5324"] = None self.rustc_cfg["has_si5324"] = None
self.rustc_cfg["SI5324_SOFT_RESET"] = None self.rustc_cfg["si5324_soft_reset"] = None
self.crg = self.ps7 # HACK for eem_7series to find the clock self.crg = self.ps7 # HACK for eem_7series to find the clock
self.submodules.rtio_crg = RTIOCRG(self.platform) self.submodules.rtio_crg = RTIOCRG(self.platform)
@ -393,6 +393,9 @@ class GenericSatellite(SoCCore):
self.add_memory_group("drtioaux_mem", drtioaux_memory_group) self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.add_csr_group("drtiorep", drtiorep_csr_group) self.add_csr_group("drtiorep", drtiorep_csr_group)
self.rustc_cfg["has_si5324"] = None
self.rustc_cfg["si5324_soft_reset"] = None
if self.acpki: if self.acpki:
self.rustc_cfg["ki_impl"] = "acp" self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc, self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,

View File

@ -18,12 +18,9 @@ use libasync::{task, block_async};
use libsupport_zynq::ram; use libsupport_zynq::ram;
use nb; use nb;
use void::Void; use void::Void;
use embedded_hal::blocking::delay::DelayMs;
use libconfig::Config; use libconfig::Config;
use libcortex_a9::l2c::enable_l2_cache; use libcortex_a9::l2c::enable_l2_cache;
use libboard_artiq::{logger, identifier_read, init_gateware, pl}; use libboard_artiq::{logger, identifier_read, init_gateware, pl};
#[cfg(has_si5324)]
use libboard_artiq::si5324;
mod proto_async; mod proto_async;
mod comms; mod comms;
@ -35,6 +32,7 @@ mod rtio;
#[path = "rtio_acp.rs"] #[path = "rtio_acp.rs"]
mod rtio; mod rtio;
mod rtio_mgt; mod rtio_mgt;
mod rtio_clocking;
mod kernel; mod kernel;
mod moninj; mod moninj;
mod eh_artiq; mod eh_artiq;
@ -44,65 +42,6 @@ mod analyzer;
mod irq; mod irq;
mod i2c; mod i2c;
fn init_rtio(timer: &mut GlobalTimer, _cfg: &Config) {
#[cfg(has_rtio_crg_clock_sel)]
let clock_sel =
if let Ok(rtioclk) = _cfg.read_str("rtioclk") {
match rtioclk.as_ref() {
"internal" => {
info!("using internal RTIO clock");
0
},
"external" => {
info!("using external RTIO clock");
1
},
other => {
warn!("RTIO clock specification '{}' not recognized", other);
info!("using internal RTIO clock");
0
},
}
} else {
info!("using internal RTIO clock (default)");
0
};
loop {
unsafe {
pl::csr::rtio_crg::pll_reset_write(1);
#[cfg(has_rtio_crg_clock_sel)]
pl::csr::rtio_crg::clock_sel_write(clock_sel);
pl::csr::rtio_crg::pll_reset_write(0);
}
timer.delay_ms(1);
let locked = unsafe { pl::csr::rtio_crg::pll_locked_read() != 0 };
if locked {
info!("RTIO PLL locked");
break;
} else {
warn!("RTIO PLL failed to lock, retrying...");
timer.delay_ms(500);
}
}
unsafe {
pl::csr::rtio_core::reset_phy_write(1);
}
}
#[cfg(has_drtio)]
fn init_drtio(timer: &mut GlobalTimer)
{
unsafe {
pl::csr::drtio_transceiver::stable_clkin_write(1);
}
timer.delay_ms(2); // wait for CPLL/QPLL lock
unsafe {
pl::csr::drtio_transceiver::txenable_write(0xffffffffu32 as _);
}
}
fn wait_for_async_rtio_error() -> nb::Result<(), Void> { fn wait_for_async_rtio_error() -> nb::Result<(), Void> {
unsafe { unsafe {
@ -136,19 +75,7 @@ async fn report_async_rtio_errors() {
} }
} }
#[cfg(has_si5324)]
// 125MHz output, from crystal, 7 Hz
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
};
static mut LOG_BUFFER: [u8; 1<<17] = [0; 1<<17]; static mut LOG_BUFFER: [u8; 1<<17] = [0; 1<<17];
@ -173,9 +100,6 @@ pub fn main_core0() {
info!("detected gateware: {}", identifier_read(&mut [0; 64])); info!("detected gateware: {}", identifier_read(&mut [0; 64]));
i2c::init(); i2c::init();
#[cfg(has_si5324)]
si5324::setup(unsafe { (&mut i2c::I2C_BUS).as_mut().unwrap() },
&SI5324_SETTINGS, si5324::Input::Ckin2, &mut timer).expect("cannot initialize Si5324");
let cfg = match Config::new() { let cfg = match Config::new() {
Ok(cfg) => cfg, Ok(cfg) => cfg,
@ -185,10 +109,8 @@ pub fn main_core0() {
} }
}; };
#[cfg(has_drtio)] rtio_clocking::init(&mut timer, &cfg);
init_drtio(&mut timer);
init_rtio(&mut timer, &cfg);
task::spawn(report_async_rtio_errors()); task::spawn(report_async_rtio_errors());
comms::main(timer, cfg); comms::main(timer, cfg);

View File

@ -0,0 +1,224 @@
use log::{info, warn};
use libboard_zynq::timer::GlobalTimer;
use embedded_hal::blocking::delay::DelayMs;
use libconfig::Config;
use libboard_artiq::pl;
#[cfg(has_si5324)]
use libboard_zynq::i2c::I2c;
#[cfg(has_si5324)]
use crate::i2c;
#[cfg(has_si5324)]
use libboard_artiq::si5324;
#[derive(Debug, PartialEq, Copy, Clone)]
#[allow(non_camel_case_types)]
pub enum RtioClock {
Default,
Int_125,
Int_100,
Int_150,
Ext0_Bypass,
Ext0_Synth0_10to125,
Ext0_Synth0_100to125,
Ext0_Synth0_125to125,
}
fn get_rtio_clock_cfg(cfg: &Config) -> RtioClock {
let mut res = RtioClock::Default;
if let Ok(clk) = cfg.read_str("rtio_clock") {
res = match clk.as_ref() {
"int_125" => RtioClock::Int_125,
"int_100" => RtioClock::Int_100,
"int_150" => RtioClock::Int_150,
"ext0_bypass" => RtioClock::Ext0_Bypass,
"ext0_bypass_125" => RtioClock::Ext0_Bypass,
"ext0_bypass_100" => RtioClock::Ext0_Bypass,
"ext0_synth0_10to125" => RtioClock::Ext0_Synth0_10to125,
"ext0_synth0_100to125" => RtioClock::Ext0_Synth0_100to125,
"ext0_synth0_125to125" => RtioClock::Ext0_Synth0_125to125,
_ => {
warn!("Unrecognised rtio_clock setting. Falling back to default.");
RtioClock::Default
}
};
}
else {
warn!("error reading configuration. Falling back to default.");
}
if res == RtioClock::Default {
warn!("Using default configuration - internal 125MHz RTIO clock.");
return RtioClock::Int_125;
}
res
}
fn init_rtio(timer: &mut GlobalTimer, _clk: RtioClock) {
#[cfg(has_rtio_crg_clock_sel)]
let clock_sel = match _clk {
RtioClock::Ext0_Bypass => {
info!("Using bypassed external clock");
1
},
RtioClock::Int_125 => {
info!("Using internal RTIO clock");
0
},
_ => {
warn!("rtio_clock setting '{:?}' is not supported. Using default internal RTIO clock instead", _clk);
0
}
};
loop {
unsafe {
pl::csr::rtio_crg::pll_reset_write(1);
#[cfg(has_rtio_crg_clock_sel)]
pl::csr::rtio_crg::clock_sel_write(clock_sel);
pl::csr::rtio_crg::pll_reset_write(0);
}
timer.delay_ms(1);
let locked = unsafe { pl::csr::rtio_crg::pll_locked_read() != 0 };
if locked {
info!("RTIO PLL locked");
break;
} else {
warn!("RTIO PLL failed to lock, retrying...");
timer.delay_ms(500);
}
}
unsafe {
pl::csr::rtio_core::reset_phy_write(1);
}
}
#[cfg(has_drtio)]
fn init_drtio(timer: &mut GlobalTimer)
{
unsafe {
pl::csr::drtio_transceiver::stable_clkin_write(1);
}
timer.delay_ms(2); // wait for CPLL/QPLL lock
unsafe {
pl::csr::drtio_transceiver::txenable_write(0xffffffffu32 as _);
}
}
#[cfg(has_si5324)]
fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
let si5324_settings = match clk {
RtioClock::Ext0_Synth0_10to125 => { // 125 MHz output from 10 MHz CLKINx reference, 504 Hz BW
info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 300,
n31 : 6,
n32 : 6,
bwsel : 4,
crystal_ref: false
}
},
RtioClock::Ext0_Synth0_100to125 => { // 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth
info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 260,
n31 : 52,
n32 : 52,
bwsel : 4,
crystal_ref: false
}
},
RtioClock::Ext0_Synth0_125to125 => { // 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth
info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 8,
n2_hs : 7,
n2_ls : 360,
n31 : 63,
n32 : 63,
bwsel : 4,
crystal_ref: false
}
},
RtioClock::Int_150 => { // 150MHz output, from crystal
info!("using internal 150MHz RTIO clock");
si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 33732,
n31 : 7139,
n32 : 7139,
bwsel : 3,
crystal_ref: true
}
},
RtioClock::Int_100 => { // 100MHz output, from crystal.
info!("using internal 100MHz RTIO clock");
si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 6,
n2_hs : 10,
n2_ls : 33732,
n31 : 7139,
n32 : 7139,
bwsel : 3,
crystal_ref: true
}
},
RtioClock::Int_125 => { // 125MHz output, from crystal, 7 Hz
info!("using internal 125MHz RTIO clock");
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
}
}
_ => { // same setting as Int_125, but fallback to default
warn!("rtio_clock setting '{:?}' is unsupported. Falling back to default internal 125MHz RTIO clock.", clk);
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
}
}
};
let si5324_ref_input = si5324::Input::Ckin2;
si5324::setup(i2c, &si5324_settings, si5324_ref_input, timer).expect("cannot initialize Si5324");
}
pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
let clk = get_rtio_clock_cfg(cfg);
#[cfg(has_si5324)]
{
let i2c = unsafe { (&mut i2c::I2C_BUS).as_mut().unwrap() };
let si5324_ext_input = si5324::Input::Ckin2;
match clk {
RtioClock::Ext0_Bypass => si5324::bypass(i2c, si5324_ext_input, timer).expect("cannot bypass Si5324"),
_ => setup_si5324(i2c, timer, clk),
}
}
#[cfg(has_drtio)]
init_drtio(timer);
init_rtio(timer, clk);
}