DRTIO port - scripts #135
28
default.nix
28
default.nix
|
|
@ -8,12 +8,14 @@ let
|
|||
vivado = import <artiq-fast/vivado.nix> { inherit pkgs; };
|
||||
# FSBL configuration supplied by Vivado 2020.1 for these boards:
|
||||
fsblTargets = ["zc702" "zc706" "zed"];
|
||||
sat_variants = ["satellite" "acpki_satellite" "nist_clock_satellite" "nist_qc2_satellite"];
|
||||
build = { target, variant, json ? null }: let
|
||||
szl = (import zynq-rs)."${target}-szl";
|
||||
fsbl = import "${zynq-rs}/nix/fsbl.nix" {
|
||||
inherit pkgs;
|
||||
board = target;
|
||||
};
|
||||
fwtype = if builtins.elem variant sat_variants then "satman" else "runtime";
|
||||
|
|
||||
|
||||
firmware = rustPlatform.buildRustPackage rec {
|
||||
# note: due to fetchCargoTarball, cargoSha256 depends on package name
|
||||
|
|
@ -33,15 +35,15 @@ let
|
|||
export XARGO_RUST_SRC="${rustPlatform.rust.rustc}/lib/rustlib/src/rust/library"
|
||||
export CLANG_EXTRA_INCLUDE_DIR="${pkgs.llvmPackages_9.clang-unwrapped.lib}/lib/clang/9.0.1/include"
|
||||
export CARGO_HOME=$(mktemp -d cargo-home.XXX)
|
||||
make TARGET=${target} GWARGS="${if json == null then "-V ${variant}" else json}"
|
||||
make TARGET=${target} GWARGS="${if json == null then "-V ${variant}" else json}" ${fwtype}
|
||||
'';
|
||||
|
||||
installPhase = ''
|
||||
mkdir -p $out $out/nix-support
|
||||
cp ../build/runtime.bin $out/runtime.bin
|
||||
cp ../build/firmware/armv7-none-eabihf/release/runtime $out/runtime.elf
|
||||
echo file binary-dist $out/runtime.bin >> $out/nix-support/hydra-build-products
|
||||
echo file binary-dist $out/runtime.elf >> $out/nix-support/hydra-build-products
|
||||
cp ../build/${fwtype}.bin $out/${fwtype}.bin
|
||||
cp ../build/firmware/armv7-none-eabihf/release/${fwtype} $out/${fwtype}.elf
|
||||
echo file binary-dist $out/${fwtype}.bin >> $out/nix-support/hydra-build-products
|
||||
echo file binary-dist $out/${fwtype}.elf >> $out/nix-support/hydra-build-products
|
||||
'';
|
||||
|
||||
doCheck = false;
|
||||
|
|
@ -66,7 +68,7 @@ let
|
|||
''
|
||||
mkdir $out
|
||||
ln -s ${szl}/szl.elf $out
|
||||
ln -s ${firmware}/runtime.bin $out
|
||||
ln -s ${firmware}/${fwtype}.bin $out
|
||||
ln -s ${gateware}/top.bit $out
|
||||
'';
|
||||
sd = pkgs.runCommand "${target}-${variant}-sd"
|
||||
|
|
@ -132,11 +134,25 @@ let
|
|||
in
|
||||
(
|
||||
(build { target = "zc706"; variant = "simple"; }) //
|
||||
(build { target = "zc706"; variant = "master"; }) //
|
||||
(build { target = "zc706"; variant = "satellite"; }) //
|
||||
(build { target = "zc706"; variant = "nist_clock"; }) //
|
||||
(build { target = "zc706"; variant = "nist_clock_master"; }) //
|
||||
(build { target = "zc706"; variant = "nist_clock_satellite"; }) //
|
||||
(build { target = "zc706"; variant = "nist_qc2"; }) //
|
||||
(build { target = "zc706"; variant = "nist_qc2_master"; }) //
|
||||
(build { target = "zc706"; variant = "nist_qc2_satellite"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_simple"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_master"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_satellite"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_nist_clock"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_nist_clock_master"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_nist_clock_satellite"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_nist_qc2"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_nist_qc2_master"; }) //
|
||||
(build { target = "zc706"; variant = "acpki_nist_qc2_satellite"; }) //
|
||||
(build { target = "kasli_soc"; variant = "demo"; json = ./demo.json; }) //
|
||||
(build { target = "kasli_soc"; variant = "master"; json = ./kasli-soc-master.json; }) //
|
||||
(build { target = "kasli_soc"; variant = "satellite"; json = ./kasli-soc-satellite.json; }) //
|
||||
{ inherit zynq-rs; }
|
||||
)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,60 @@
|
|||
{
|
||||
"target": "kasli_soc",
|
||||
"variant": "master",
|
||||
"hw_rev": "v1.0",
|
||||
"base": "master",
|
||||
"peripherals": [
|
||||
{
|
||||
"type": "grabber",
|
||||
"ports": [0]
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [1],
|
||||
"bank_direction_low": "input",
|
||||
"bank_direction_high": "output"
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [2],
|
||||
"bank_direction_low": "output",
|
||||
"bank_direction_high": "output"
|
||||
},
|
||||
{
|
||||
"type": "urukul",
|
||||
"dds": "ad9910",
|
||||
"ports": [3, 4],
|
||||
"clk_sel": 2
|
||||
},
|
||||
{
|
||||
"type": "zotino",
|
||||
"ports": [5]
|
||||
},
|
||||
{
|
||||
"type": "sampler",
|
||||
"ports": [6, 7]
|
||||
},
|
||||
{
|
||||
"type": "mirny",
|
||||
"ports": [8],
|
||||
"clk_sel": 1,
|
||||
"refclk": 125e6
|
||||
},
|
||||
{
|
||||
"type": "fastino",
|
||||
"ports": [9]
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [10],
|
||||
"bank_direction_low": "input",
|
||||
"bank_direction_high": "input"
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [11],
|
||||
"bank_direction_low": "output",
|
||||
"bank_direction_high": "input"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
{
|
||||
"target": "kasli_soc",
|
||||
"variant": "satellite",
|
||||
"hw_rev": "v1.0",
|
||||
"base": "satellite",
|
||||
"peripherals": [
|
||||
{
|
||||
"type": "grabber",
|
||||
"ports": [0]
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [1],
|
||||
"bank_direction_low": "input",
|
||||
"bank_direction_high": "output"
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [2],
|
||||
"bank_direction_low": "output",
|
||||
"bank_direction_high": "output"
|
||||
},
|
||||
{
|
||||
"type": "urukul",
|
||||
"dds": "ad9910",
|
||||
"ports": [3, 4],
|
||||
"clk_sel": 2
|
||||
},
|
||||
{
|
||||
"type": "zotino",
|
||||
"ports": [5]
|
||||
},
|
||||
{
|
||||
"type": "sampler",
|
||||
"ports": [6, 7]
|
||||
},
|
||||
{
|
||||
"type": "mirny",
|
||||
"ports": [8],
|
||||
"clk_sel": 1,
|
||||
"refclk": 125e6
|
||||
},
|
||||
{
|
||||
"type": "fastino",
|
||||
"ports": [9]
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [10],
|
||||
"bank_direction_low": "input",
|
||||
"bank_direction_high": "input"
|
||||
},
|
||||
{
|
||||
"type": "dio",
|
||||
"ports": [11],
|
||||
"bank_direction_low": "output",
|
||||
"bank_direction_high": "input"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
|
@ -14,8 +14,9 @@ fi
|
|||
impure=0
|
||||
load_bitstream=1
|
||||
board_type="kasli_soc"
|
||||
fw_type="runtime"
|
||||
|
||||
while getopts "ilb:t:" opt; do
|
||||
while getopts "ilb:t:f:" opt; do
|
||||
case "$opt" in
|
||||
\?) exit 1
|
||||
;;
|
||||
|
|
@ -27,6 +28,8 @@ while getopts "ilb:t:" opt; do
|
|||
;;
|
||||
t) board_type=$OPTARG
|
||||
;;
|
||||
f) fw_type=$OPTARG
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
|
|
@ -49,10 +52,10 @@ if [ $impure -eq 1 ]; then
|
|||
if [ $load_bitstream -eq 1 ]; then
|
||||
load_bitstream_cmd="-g $build_dir/gateware/top.bit"
|
||||
fi
|
||||
artiq_netboot $load_bitstream_cmd -f $build_dir/runtime.bin -b $board_host
|
||||
artiq_netboot $load_bitstream_cmd -f $build_dir/$fwtype.bin -b $board_host
|
||||
else
|
||||
if [ $load_bitstream -eq 1 ]; then
|
||||
load_bitstream_cmd="-g $result_dir/top.bit"
|
||||
fi
|
||||
artiq_netboot $load_bitstream_cmd -f $result_dir/runtime.bin -b $board_host
|
||||
artiq_netboot $load_bitstream_cmd -f $result_dir/$fwtype.bin -b $board_host
|
||||
fi
|
||||
|
|
@ -20,8 +20,9 @@ impure_dir="build"
|
|||
sshopts=""
|
||||
load_bitstream=1
|
||||
board_host="192.168.1.52"
|
||||
fw_type="runtime"
|
||||
|
||||
while getopts "h:id:o:l" opt; do
|
||||
while getopts "h:id:o:lt:" opt; do
|
||||
case "$opt" in
|
||||
\?) exit 1
|
||||
;;
|
||||
|
|
@ -38,6 +39,8 @@ while getopts "h:id:o:l" opt; do
|
|||
;;
|
||||
b) board_host=$OPTARG
|
||||
;;
|
||||
t) fw_type=$OPTARG
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
|
|
@ -53,12 +56,12 @@ if [ $impure -eq 1 ]; then
|
|||
if [ $load_bitstream -eq 1 ]; then
|
||||
load_bitstream_cmd="-g build/gateware/top.bit"
|
||||
fi
|
||||
firmware="build/runtime.bin"
|
||||
firmware="build/$fw_type.bin"
|
||||
else
|
||||
if [ $load_bitstream -eq 1 ]; then
|
||||
load_bitstream_cmd="-g $pure_dir/top.bit"
|
||||
fi
|
||||
firmware="$pure_dir/runtime.bin"
|
||||
firmware="$pure_dir/$fw_type.bin"
|
||||
fi
|
||||
echo "Programming board..."
|
||||
ssh $sshopts $target_host "cd $target_folder; openocd -f zc706.cfg -c'load_image szl.elf; resume 0; exit'"
|
||||
|
|
|
|||
|
|
@ -3,8 +3,10 @@ members = [
|
|||
"libc",
|
||||
"libdyld",
|
||||
"libdwarf",
|
||||
"libio",
|
||||
"libunwind",
|
||||
"runtime",
|
||||
"satman"
|
||||
]
|
||||
|
||||
[profile.release]
|
||||
|
|
|
|||
18
src/Makefile
18
src/Makefile
|
|
@ -1,16 +1,18 @@
|
|||
TARGET := zc706
|
||||
GWARGS := -V simple
|
||||
|
||||
all: ../build/firmware/armv7-none-eabihf/release/runtime ../build/runtime.bin
|
||||
all: runtime
|
||||
|
||||
runtime: ../build/runtime.bin
|
||||
|
||||
.PHONY: all
|
||||
sb10q
commented
What are these What are these ``*_target`` things for?
Also (assuming they are necessary at all), if there are no ``*_target`` files produced those rules should be ``PHONY``.
mwojcik
commented
I was aiming for clearer reference of the targets in nix-scripts, or when called manually. But it's unnecessary after all, it can be called straight up with the output file rule. I was aiming for clearer reference of the targets in nix-scripts, or when called manually. But it's unnecessary after all, it can be called straight up with the output file rule.
sb10q
commented
OK, I see. Yes the manual command is a bit unwieldy, I suggest adding them back but listed as PHONY. I will merge this now, please send a new PR. OK, I see. Yes the manual command is a bit unwieldy, I suggest adding them back but listed as PHONY. I will merge this now, please send a new PR.
|
||||
|
||||
|
||||
../build/pl.rs ../build/rustc-cfg: gateware/*
|
||||
mkdir -p ../build
|
||||
python gateware/$(TARGET).py -r ../build/pl.rs -c ../build/rustc-cfg $(GWARGS)
|
||||
python gateware/$(TARGET).py -r ../build/pl.rs -c ../build/rustc-cfg -m ../build/mem.rs $(GWARGS)
|
||||
|
||||
../build/firmware/armv7-none-eabihf/release/runtime: ../build/pl.rs ../build/rustc-cfg $(shell find . -print)
|
||||
../build/firmware/armv7-none-eabihf/release/runtime: ../build/pl.rs ../build/rustc-cfg
|
||||
cd runtime && \
|
||||
XBUILD_SYSROOT_PATH=`pwd`/../../build/sysroot \
|
||||
cargo xbuild --release \
|
||||
|
|
@ -19,3 +21,13 @@ all: ../build/firmware/armv7-none-eabihf/release/runtime ../build/runtime.bin
|
|||
|
||||
../build/runtime.bin: ../build/firmware/armv7-none-eabihf/release/runtime
|
||||
llvm-objcopy -O binary ../build/firmware/armv7-none-eabihf/release/runtime ../build/runtime.bin
|
||||
|
||||
satmanout: ../build/pl.rs ../build/rustc-cfg
|
||||
cd satman && \
|
||||
XBUILD_SYSROOT_PATH=`pwd`/../../build/sysroot \
|
||||
cargo xbuild --release \
|
||||
--target-dir ../../build/firmware \
|
||||
--no-default-features --features=target_$(TARGET)
|
||||
|
||||
satman: satmanout
|
||||
llvm-objcopy -O binary ../build/firmware/armv7-none-eabihf/release/satman ../build/satman.bin
|
||||
Loading…
Reference in New Issue
You can read the JSON to determine that.
Nix has
builtins.fromJSONzc706 doesn't use JSONs, though. Now that I think about it I could make it a bit better still by having the fwtype specified in the list of targets at the bottom, passed to the build function instead.