kasli_soc: add SFP0..3 LED indication

io_expander SFP0 LED map depend on hw_rev.

src/gateware/kasli_soc.py

@@ -86,6 +86,8 @@ class GenericStandalone(SoCCore):
         self.acpki = acpki
         self.rustc_cfg = dict()
 
+        self.rustc_cfg["hw_rev"] = description["hw_rev"]
+
         platform = kasli_soc.Platform()
         platform.toolchain.bitstream_commands.extend([
             "set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
@@ -178,6 +180,8 @@ class GenericMaster(SoCCore):
         self.acpki = acpki
         self.rustc_cfg = dict()
 
+        self.rustc_cfg["hw_rev"] = description["hw_rev"]
+
         platform = kasli_soc.Platform()
         platform.toolchain.bitstream_commands.extend([
             "set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
@@ -208,6 +212,7 @@ class GenericMaster(SoCCore):
             txout_buf,
             clk_sw=gtx0.tx_init.done)
         self.csr_devices.append("sys_crg")
+
         self.crg = self.ps7 # HACK for eem_7series to find the clock
         self.crg.cd_sys = self.sys_crg.cd_sys
         platform.add_false_path_constraints(
@@ -312,6 +317,8 @@ class GenericSatellite(SoCCore):
         self.acpki = acpki
         self.rustc_cfg = dict()
 
+        self.rustc_cfg["hw_rev"] = description["hw_rev"]
+
         platform = kasli_soc.Platform()
         platform.toolchain.bitstream_commands.extend([
             "set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
@@ -342,6 +349,7 @@ class GenericSatellite(SoCCore):
         platform.add_false_path_constraints(
             self.bootstrap.cd_bootstrap.clk, self.sys_crg.cd_sys.clk)
         self.csr_devices.append("sys_crg")
+
         self.crg = self.ps7 # HACK for eem_7series to find the clock
         self.crg.cd_sys = self.sys_crg.cd_sys
 

src/libboard_artiq/src/io_expander.rs

@@ -10,44 +10,84 @@ struct Registers {
     gpiob: u8,  // Output Port 1
 }
 
+//IO expanders pins
+const IO_DIR_INPUT_ALL: u8          = 0xFF;
+const IO_DIR_OUT_SFP_TX_DISABLE: u8 = !0x02;
+const IO_DIR_OUT_SFP_LED:u8         = !0x40;
+//SFP0 LED has different place in v1.1
+#[cfg(hw_rev = "v1.0")]
+const IO_DIR_OUT_SFP0_LED: u8 = !0x40;
+#[cfg(hw_rev = "v1.1")]
+const IO_DIR_OUT_SFP0_LED: u8 = !0x80;
+
+//IO expander port direction
+const IO_DIR_MAPPING0: [u8; 2] = [IO_DIR_INPUT_ALL & IO_DIR_OUT_SFP_TX_DISABLE & (IO_DIR_OUT_SFP0_LED),
+                                  IO_DIR_INPUT_ALL & IO_DIR_OUT_SFP_TX_DISABLE &  IO_DIR_OUT_SFP_LED];
+
+const IO_DIR_MAPPING1: [u8; 2] = [IO_DIR_INPUT_ALL & IO_DIR_OUT_SFP_TX_DISABLE & IO_DIR_OUT_SFP_LED,
+                                  IO_DIR_INPUT_ALL & IO_DIR_OUT_SFP_TX_DISABLE & IO_DIR_OUT_SFP_LED];
+
+//state of input/output pins
+struct IoState {
+    iodir: [u8; 2],
+    out_current: [u8; 2],
+    out_target: [u8; 2]
+}
+static mut IO_STATE: [IoState; 2] = [
+    IoState {
+        iodir: IO_DIR_MAPPING0,
+        out_current: [0; 2],
+        out_target: [0; 2],
+    },
+    IoState {
+        iodir: IO_DIR_MAPPING1,
+        out_current: [0; 2],
+        out_target: [0; 2],
+    },
+];
+
 pub struct IoExpander<'a> {
     i2c: &'a mut i2c::I2c,
     address: u8,
-    iodir: [u8; 2],
-    out_current: [u8; 2],
-    out_target: [u8; 2],
     registers: Registers,
+    virtual_led_mapping: &'static [(u8, u8, u8)],
+    channel: usize,
 }
 
 impl<'a> IoExpander<'a> {
     pub fn new(i2c: &'a mut i2c::I2c, index: u8) -> Result<Self, &'static str> {
+        #[cfg(hw_rev = "v1.0")]
+        const VIRTUAL_LED_MAPPING0: [(u8, u8, u8); 2] = [(0, 0, 6), (1, 1, 6)];
+        #[cfg(hw_rev = "v1.1")]
+        const VIRTUAL_LED_MAPPING0: [(u8, u8, u8); 2] = [(0, 0, 7), (1, 1, 6)];
+
+        const VIRTUAL_LED_MAPPING1: [(u8, u8, u8); 2] = [(2, 0, 6), (3, 1, 6)];
+
         // Both expanders on SHARED I2C bus
         let mut io_expander = match index {
             0 => IoExpander {
                 i2c,
                 address: 0x40,
-                iodir: [0xff; 2],
-                out_current: [0; 2],
-                out_target: [0; 2],
                 registers: Registers {
                     iodira: 0x00,
                     iodirb: 0x01,
                     gpioa: 0x12,
                     gpiob: 0x13,
                 },
+                virtual_led_mapping: &VIRTUAL_LED_MAPPING0,
+                channel: 0,
             },
             1 => IoExpander {
                 i2c,
                 address: 0x42,
-                iodir: [0xff; 2],
-                out_current: [0; 2],
-                out_target: [0; 2],
                 registers: Registers {
                     iodira: 0x00,
                     iodirb: 0x01,
                     gpioa: 0x12,
                     gpiob: 0x13,
                 },
+                virtual_led_mapping: &VIRTUAL_LED_MAPPING1,
+                channel: 1,
             },
             _ => return Err("incorrect I/O expander index"),
         };
@@ -92,49 +132,69 @@ impl<'a> IoExpander<'a> {
     }
 
     fn update_iodir(&mut self) -> Result<(), &'static str> {
-        self.write(self.registers.iodira, self.iodir[0])?;
-        self.write(self.registers.iodirb, self.iodir[1])?;
+        unsafe {
+            self.write(self.registers.iodira, IO_STATE[self.channel].iodir[0])?;
+            self.write(self.registers.iodirb, IO_STATE[self.channel].iodir[1])?;
+        };
         Ok(())
     }
 
     pub fn init(&mut self) -> Result<(), &'static str> {
         self.select()?;
+        unsafe {
+            IO_STATE[self.channel].iodir[0] = match self.channel {
+                0 => IO_DIR_MAPPING0[0],
+                1 => IO_DIR_MAPPING1[0],
+                _ => IO_DIR_INPUT_ALL,
+            };
+            IO_STATE[self.channel].iodir[1] = match self.channel {
+                0 => IO_DIR_MAPPING0[1],
+                1 => IO_DIR_MAPPING1[1],
+                _ => IO_DIR_INPUT_ALL,
+            };
+            IO_STATE[self.channel].out_target[0] = 0x00;
+            IO_STATE[self.channel].out_target[1] = 0x00;
+            IO_STATE[self.channel].out_current[0] = 0x00;
+            IO_STATE[self.channel].out_current[1] = 0x00;
+        };
         self.update_iodir()?;
-
-        self.out_current[0] = 0x00;
         self.write(self.registers.gpioa, 0x00)?;
-        self.out_current[1] = 0x00;
         self.write(self.registers.gpiob, 0x00)?;
         Ok(())
     }
 
-    pub fn set_oe(&mut self, port: u8, outputs: u8) -> Result<(), &'static str> {
-        self.iodir[port as usize] &= !outputs;
-        self.update_iodir()?;
-        Ok(())
+    pub fn set(&mut self, port: u8, bit: u8, high: bool) {
+        unsafe {
+            if high {
+                IO_STATE[self.channel].out_target[port as usize] |= 1 << bit;
+            } else {
+                IO_STATE[self.channel].out_target[port as usize] &= !(1 << bit);
+            }
+        };
     }
 
-    pub fn set(&mut self, port: u8, bit: u8, high: bool) {
-        if high {
-            self.out_target[port as usize] |= 1 << bit;
-        } else {
-            self.out_target[port as usize] &= !(1 << bit);
+    pub fn led_update(&mut self, led_state: u8) {
+        for (led_num, port, bit) in self.virtual_led_mapping.iter() {
+            let level = (led_state >> led_num) & 1;
+            self.set(*port, *bit, level != 0);
         }
+        self.service().unwrap();
     }
 
     pub fn service(&mut self) -> Result<(), &'static str> {
-        if self.out_target != self.out_current {
+        unsafe {
+            if IO_STATE[self.channel].out_target != IO_STATE[self.channel].out_current {
                 self.select()?;
-            if self.out_target[0] != self.out_current[0] {
-                self.write(self.registers.gpioa, self.out_target[0])?;
-                self.out_current[0] = self.out_target[0];
+                if IO_STATE[self.channel].out_target[0] != IO_STATE[self.channel].out_current[0] {
+                    self.write(self.registers.gpioa, IO_STATE[self.channel].out_target[0])?;
+                    IO_STATE[self.channel].out_current[0] = IO_STATE[self.channel].out_target[0];
                 }
-            if self.out_target[1] != self.out_current[1] {
-                self.write(self.registers.gpiob, self.out_target[1])?;
-                self.out_current[1] = self.out_target[1];
+                if IO_STATE[self.channel].out_target[1] != IO_STATE[self.channel].out_current[1] {
+                    self.write(self.registers.gpiob, IO_STATE[self.channel].out_target[1])?;
+                    IO_STATE[self.channel].out_current[1] = IO_STATE[self.channel].out_target[1];
                 }
             }
-
+        };
         Ok(())
     }
 }

src/runtime/src/main.rs

@@ -102,6 +102,42 @@ async fn report_async_rtio_errors() {
     }
 }
 
+#[cfg(all(feature = "target_kasli_soc", has_drtio))]
+static mut SEEN_RTIO_LED: u8 = 0;
+#[cfg(all(feature = "target_kasli_soc", has_drtio))]
+static mut READ_RTIO_LED: u8 = 0;
+
+#[cfg(all(feature = "target_kasli_soc", has_drtio))]
+fn wait_for_rtio_led_change() -> nb::Result<(), Void> {
+    unsafe {
+        let len: usize = pl::csr::DRTIO.len();
+        READ_RTIO_LED = 0;
+        for linkno in 0..len {
+            //let linkno = linkno as usize;
+            READ_RTIO_LED |= (pl::csr::DRTIO[linkno].rx_up_read)() << linkno;
+        }
+        if READ_RTIO_LED != SEEN_RTIO_LED {
+            Ok(())
+        } else {
+            Err(nb::Error::WouldBlock)
+        }
+    }
+}
+#[cfg(all(feature = "target_kasli_soc", has_drtio))]
+async fn async_rtio_led() {
+    loop {
+        let _ = block_async!(wait_for_rtio_led_change()).await;
+        unsafe {
+            let i2c = (&mut i2c::I2C_BUS).as_mut().unwrap();
+            for expander_i in 0..=1 {
+                let mut io_expander = io_expander::IoExpander::new(i2c, expander_i).unwrap();
+                io_expander.led_update(READ_RTIO_LED);
+            }
+            SEEN_RTIO_LED = READ_RTIO_LED;
+        };
+    }
+}
+
 static mut LOG_BUFFER: [u8; 1 << 17] = [0; 1 << 17];
 
 #[no_mangle]
@@ -130,8 +166,6 @@ pub fn main_core0() {
             let mut io_expander = io_expander::IoExpander::new(i2c, expander_i).unwrap();
             io_expander.init().expect("I2C I/O expander #0 initialization failed");
             // Actively drive TX_DISABLE to false on SFP0..3
-            io_expander.set_oe(0, 1 << 1).unwrap();
-            io_expander.set_oe(1, 1 << 1).unwrap();
             io_expander.set(0, 1, false);
             io_expander.set(1, 1, false);
             io_expander.service().unwrap();
@@ -150,5 +184,8 @@ pub fn main_core0() {
 
     task::spawn(report_async_rtio_errors());
 
+    #[cfg(all(feature = "target_kasli_soc", has_drtio))]
+    task::spawn(async_rtio_led());
+
     comms::main(timer, cfg);
 }

src/satman/src/main.rs

@@ -591,6 +591,23 @@ const SI5324_SETTINGS: si5324::FrequencySettings = si5324::FrequencySettings {
     crystal_as_ckin2: true,
 };
 
+#[cfg(all(feature = "target_kasli_soc", has_drtio))]
+fn sfp_leds_update(i2c: &mut I2c) {
+    let mut virtual_leds;
+    unsafe {
+        virtual_leds = csr::drtiosat::rx_up_read();
+        let len: usize = csr::DRTIOREP.len();
+        for linkno in 0..len {
+            virtual_leds |= (csr::DRTIOREP[linkno].rx_up_read)() << (linkno + 1);
+        }
+    }
+
+    for expander_i in 0..=1 {
+        let mut io_expander = io_expander::IoExpander::new(i2c, expander_i).unwrap();
+        io_expander.led_update(virtual_leds);
+    }
+}
+
 static mut LOG_BUFFER: [u8; 1 << 17] = [0; 1 << 17];
 
 #[no_mangle]
@@ -617,8 +634,6 @@ pub extern "C" fn main_core0() -> i32 {
             let mut io_expander = io_expander::IoExpander::new(&mut i2c, expander_i).unwrap();
             io_expander.init().expect("I2C I/O expander #0 initialization failed");
             // Actively drive TX_DISABLE to false on SFP0..3
-            io_expander.set_oe(0, 1 << 1).unwrap();
-            io_expander.set_oe(1, 1 << 1).unwrap();
             io_expander.set(0, 1, false);
             io_expander.set(1, 1, false);
             io_expander.service().unwrap();
@@ -664,6 +679,8 @@ pub extern "C" fn main_core0() -> i32 {
             for mut rep in repeaters.iter_mut() {
                 rep.service(&routing_table, rank, &mut timer);
             }
+            #[cfg(all(feature = "target_kasli_soc", has_drtio))]
+            sfp_leds_update(&mut i2c);
             hardware_tick(&mut hardware_tick_ts, &mut timer);
         }
 
@@ -700,6 +717,8 @@ pub extern "C" fn main_core0() -> i32 {
             for mut rep in repeaters.iter_mut() {
                 rep.service(&routing_table, rank, &mut timer);
             }
+            #[cfg(all(feature = "target_kasli_soc", has_drtio))]
+            sfp_leds_update(&mut i2c);
             hardware_tick(&mut hardware_tick_ts, &mut timer);
             if drtiosat_tsc_loaded() {
                 info!("TSC loaded from uplink");