M-Labs
/
artiq-zynq
10
1
Fork 19
Code Issues 13 Pull Requests Releases Wiki Activity

Compare commits

base: M-Labs:5c054cc90194b7647f78168b51bc452eed42f33e
Branches Tags
M-Labs:master
M-Labs:release-7
M-Labs:release-8
M-Labs:release-6
..
compare: M-Labs:8e0229d2651633fc6cd449b55a559742c56add18
Branches Tags
M-Labs:release-7
M-Labs:release-8
M-Labs:master
M-Labs:release-6

2 Commits
5c054cc901 ... 8e0229d265

Author SHA1 Message Date
David Nadlinger 8e0229d265 si5324: crystal_{ref -> as_ckin2} [nfc] 
This makes it clear that by itself, the flag does not
cause the input mux to be changed.
 2022-12-17 01:33:50 +00:00
David Nadlinger 2ddb4d259f Undo most of Si5324 unification (5c054cc901) 
This reverts most of 5c054cc901, as it turns out that
si5324::setup is in fact also used to configure the
chip for operation as a DRTIO satellite.
 2022-12-17 01:31:14 +00:00
3 changed files with 102 additions and 84 deletions
Show Stats Expand all files Collapse all files

11
src/libboard_artiq/src/si5324.rs
View File

@ -29,7 +29,7 @@ pub struct FrequencySettings {
pub n31: u32,
pub n32: u32,
pub bwsel: u8,
pub crystal_ref: bool
pub crystal_as_ckin2: bool
}
pub enum Input {
@ -84,7 +84,7 @@ fn map_frequency_settings(settings: &FrequencySettings) -> Result<FrequencySetti
n31: settings.n31 - 1,
n32: settings.n32 - 1,
bwsel: settings.bwsel,
crystal_ref: settings.crystal_ref
crystal_as_ckin2: settings.crystal_as_ckin2
};
Ok(r)
}
@ -219,18 +219,15 @@ pub fn bypass(i2c: &mut I2c, input: Input, timer: &mut GlobalTimer) -> Result<()
Ok(())
}
pub fn setup(i2c: &mut I2c, settings: &FrequencySettings, ext_input: Input, timer: &mut GlobalTimer) -> Result<()> {
pub fn setup(i2c: &mut I2c, settings: &FrequencySettings, input: Input, timer: &mut GlobalTimer) -> Result<()> {
let s = map_frequency_settings(settings)?;
// FREE_RUN=1 routes XA/XB to CKIN2.
let input = if settings.crystal_ref { Input::Ckin2 } else { ext_input };
let cksel_reg = match input {
Input::Ckin1 => 0b00,
Input::Ckin2 => 0b01,
};
init(i2c, timer)?;
if settings.crystal_ref {
if settings.crystal_as_ckin2 {
rmw(i2c, 0, |v| v | 0x40)?; // FREE_RUN=1
}
rmw(i2c, 2, |v| (v & 0x0f) | (s.bwsel << 4))?;

59
src/runtime/src/rtio_clocking.rs
View File

@ -121,9 +121,10 @@ const SI5324_EXT_INPUT: si5324::Input = si5324::Input::Ckin1;
#[cfg(has_si5324)]
fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
let si5324_settings = match clk {
let (si5324_settings, si5324_ref_input) = match clk {
RtioClock::Ext0_Synth0_10to125 => { // 125 MHz output from 10 MHz CLKINx reference, 504 Hz BW
info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
(
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
@ -132,11 +133,14 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
n31 : 6,
n32 : 6,
bwsel : 4,
crystal_ref: false
}
crystal_as_ckin2: false
},
SI5324_EXT_INPUT
)
},
RtioClock::Ext0_Synth0_100to125 => { // 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth
info!("using 100MHz reference to make 125MHz RTIO clock with PLL");
(
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
@ -145,11 +149,14 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
n31 : 52,
n32 : 52,
bwsel : 4,
crystal_ref: false
}
crystal_as_ckin2: false
},
SI5324_EXT_INPUT
)
},
RtioClock::Ext0_Synth0_125to125 => { // 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth
info!("using 125MHz reference to make 125MHz RTIO clock with PLL");
(
si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 8,
@ -158,11 +165,14 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
n31 : 63,
n32 : 63,
bwsel : 4,
crystal_ref: false
}
crystal_as_ckin2: false
},
SI5324_EXT_INPUT
)
},
RtioClock::Int_150 => { // 150MHz output, from crystal
info!("using internal 150MHz RTIO clock");
(
si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 4,
@ -171,11 +181,14 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
n31 : 7139,
n32 : 7139,
bwsel : 3,
crystal_ref: true
}
crystal_as_ckin2: true
},
si5324::Input::Ckin2
)
},
RtioClock::Int_100 => { // 100MHz output, from crystal
info!("using internal 100MHz RTIO clock");
(
si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 6,
@ -184,11 +197,14 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
n31 : 7139,
n32 : 7139,
bwsel : 3,
crystal_ref: true
}
crystal_as_ckin2: true
},
si5324::Input::Ckin2
)
},
RtioClock::Int_125 => { // 125MHz output, from crystal, 7 Hz
info!("using internal 125MHz RTIO clock");
(
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
@ -197,11 +213,14 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
}
}
_ => { // 125MHz output like above, default (if chosen option is not supported)
warn!("rtio_clock setting '{:?}' is not supported. Falling back to default internal 125MHz RTIO clock.", clk);
crystal_as_ckin2: true
},
si5324::Input::Ckin2
)
},
_ => { // same setting as Int_125, but fallback to default
warn!("rtio_clock setting '{:?}' is unsupported. Falling back to default internal 125MHz RTIO clock.", clk);
(
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
@ -210,11 +229,13 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
}
crystal_as_ckin2: true
},
si5324::Input::Ckin2
)
}
};
si5324::setup(i2c, &si5324_settings, SI5324_EXT_INPUT, timer).expect("cannot initialize Si5324");
si5324::setup(i2c, &si5324_settings, si5324_ref_input, timer).expect("cannot initialize Si5324");
}
pub fn init(timer: &mut GlobalTimer, cfg: &Config) {

4
src/satman/src/main.rs
View File

@ -428,7 +428,7 @@ const SI5324_SETTINGS: si5324::FrequencySettings
n31 : 63,
n32 : 63,
bwsel : 4,
crystal_ref: true
crystal_as_ckin2: true
};
#[cfg(all(has_si5324, rtio_frequency = "100.0"))]
@ -441,7 +441,7 @@ const SI5324_SETTINGS: si5324::FrequencySettings
n31 : 50,
n32 : 50,
bwsel : 4,
crystal_ref: true
crystal_as_ckin2: true
};
static mut LOG_BUFFER: [u8; 1<<17] = [0; 1<<17];