diff --git a/examples/blink_forever.py b/examples/blink_forever.py
index 52a66de..470e8c4 100644
--- a/examples/blink_forever.py
+++ b/examples/blink_forever.py
@@ -10,5 +10,5 @@ class BlinkForever(EnvExperiment):
     def run(self):
         self.core.reset()
         while True:
-            self.led0.pulse(100*ms)
-            delay(100*ms)
+            self.led0.pulse(490*ns)
+            delay(490*ns)
diff --git a/src/runtime/src/rtio_acp.rs b/src/runtime/src/rtio_acp.rs
index 727933d..83414cb 100644
--- a/src/runtime/src/rtio_acp.rs
+++ b/src/runtime/src/rtio_acp.rs
@@ -1,7 +1,6 @@
-use cslice::{CSlice, AsCSlice};
+use cslice::CSlice;
 use vcell::VolatileCell;
-use libcortex_a9::{asm, cache::dcci};
-use log::debug;
+use libcortex_a9::asm;
 use crate::artiq_raise;
 use core::sync::atomic::{fence, Ordering};
 
@@ -55,8 +54,6 @@ pub extern fn init() {
         csr::rtio_core::reset_write(1);
         csr::rtio::engine_addr_base_write(&TRANSACTION_BUFFER as *const Transaction as u32);
         csr::rtio::enable_write(1);
-        debug!("Set reply status");
-        TRANSACTION_BUFFER.reply_status.set(0x1000);
     }
 }
 
@@ -107,6 +104,17 @@ unsafe fn process_exceptional_status(channel: i32, status: i32) {
 
 pub extern fn output(target: i32, data: i32) {
     unsafe {
+        // Clear status so we can observe response
+        TRANSACTION_BUFFER.reply_status.set(0);
+
+        TRANSACTION_BUFFER.request_cmd = 0;
+        TRANSACTION_BUFFER.data_width = 1;
+        TRANSACTION_BUFFER.request_target = target;
+        TRANSACTION_BUFFER.request_timestamp = NOW;
+        TRANSACTION_BUFFER.request_data[0] = data;
+
+        fence(Ordering::SeqCst);
+        asm::sev();
         let mut status;
         loop {
             status = TRANSACTION_BUFFER.reply_status.get();
@@ -119,28 +127,22 @@ pub extern fn output(target: i32, data: i32) {
         if status != 0 {
             process_exceptional_status(target >> 8, status);
         }
-        // Clear status so we can observe response
-        TRANSACTION_BUFFER.reply_status.set(0);
-
-        // volatile are not used temporarily to allow the compiler to optimize better...
-        // probably would use it back later.
-        TRANSACTION_BUFFER.request_cmd = 0;
-        TRANSACTION_BUFFER.data_width = 1;
-        TRANSACTION_BUFFER.request_target = target;
-        TRANSACTION_BUFFER.request_timestamp = NOW;
-        TRANSACTION_BUFFER.request_data[0] = data;
-
-        fence(Ordering::SeqCst);
-        asm::sev();
-        dcci(&TRANSACTION_BUFFER.reply_status);
-        // asm::wfe();
-        // optimize cache...
-        // asm::wfe();
     }
 }
 
 pub extern fn output_wide(target: i32, data: CSlice<i32>) {
     unsafe {
+        // Clear status so we can observe response
+        TRANSACTION_BUFFER.reply_status.set(0);
+
+        TRANSACTION_BUFFER.request_cmd = 0;
+        TRANSACTION_BUFFER.data_width = data.len() as i8;
+        TRANSACTION_BUFFER.request_target = target;
+        TRANSACTION_BUFFER.request_timestamp = NOW;
+        TRANSACTION_BUFFER.request_data[..data.len()].copy_from_slice(data.as_ref());
+
+        fence(Ordering::SeqCst);
+        asm::sev();
         let mut status;
         loop {
             status = TRANSACTION_BUFFER.reply_status.get();
@@ -153,18 +155,6 @@ pub extern fn output_wide(target: i32, data: CSlice<i32>) {
         if status != 0 {
             process_exceptional_status(target >> 8, status);
         }
-        // Clear status so we can observe response
-        TRANSACTION_BUFFER.reply_status.set(0);
-
-        TRANSACTION_BUFFER.request_cmd = 0;
-        TRANSACTION_BUFFER.data_width = data.len() as i8;
-        TRANSACTION_BUFFER.request_target = target;
-        TRANSACTION_BUFFER.request_timestamp = NOW;
-        TRANSACTION_BUFFER.request_data[..data.len()].copy_from_slice(data.as_ref());
-
-        fence(Ordering::SeqCst);
-        asm::sev();
-        dcci(&TRANSACTION_BUFFER.reply_status);
     }
 }
 
@@ -179,7 +169,6 @@ pub extern fn input_timestamp(timeout: i64, channel: i32) -> i64 {
 
         fence(Ordering::SeqCst);
         asm::sev();
-        dcci(&TRANSACTION_BUFFER.reply_status);
 
         let mut status;
         loop {
@@ -217,7 +206,6 @@ pub extern fn input_data(channel: i32) -> i32 {
 
         fence(Ordering::SeqCst);
         asm::sev();
-        dcci(&TRANSACTION_BUFFER.reply_status);
 
         let mut status;
         loop {
@@ -252,7 +240,6 @@ pub extern fn input_timestamped_data(timeout: i64, channel: i32) -> TimestampedD
 
         fence(Ordering::SeqCst);
         asm::sev();
-        dcci(&TRANSACTION_BUFFER.reply_status);
 
         let mut status;
         loop {