add DMA core (untested)

This commit is contained in:
Sebastien Bourdeauducq 2020-07-13 10:37:17 +08:00
parent d79da19956
commit a7073edf79
2 changed files with 148 additions and 1 deletions
src/gateware

139
src/gateware/dma.py Normal file
View File

@ -0,0 +1,139 @@
from migen import *
from migen.genlib.record import Record, layout_len
from migen.genlib.fsm import FSM
from misoc.interconnect.csr import *
from misoc.interconnect import stream
from migen_axi.interconnect import axi
from artiq.gateware.rtio.dma import RawSlicer, RecordConverter, RecordSlicer, TimeOffset, CRIMaster
AXI_BURST_LEN = 16
class AXIReader(Module):
def __init__(self, membus):
aw = len(membus.ar.addr)
dw = len(membus.r.data)
alignment_bits = log2_int(AXI_BURST_LEN*dw//8)
self.sink = stream.Endpoint([("address", aw - alignment_bits)])
self.source = stream.Endpoint([("data", dw)])
# # #
ar = membus.ar
r = membus.r
eop_pending = Signal()
self.sync += [
If(self.sink.stb & self.sink.ack & self.sink.eop, eop_pending.eq(1)),
If(self.source.stb & self.source.ack & self.source.eop, eop_pending.eq(0)),
]
self.comb += [
ar.addr.eq(Cat(C(0, alignment_bits), self.sink.address)),
ar.id.eq(0), # Same ID for all transactions to forbid reordering.
ar.burst.eq(axi.Burst.incr.value),
ar.len.eq(AXI_BURST_LEN-1), # Number of transfers in burst (0->1 transfer, 1->2 transfers...).
ar.size.eq(log2_int(dw//8)), # Width of burst: 3 = 8 bytes = 64 bits.
ar.cache.eq(0xf),
ar.valid.eq(self.sink.stb & ~eop_pending),
self.sink.ack.eq(ar.ready & ~eop_pending)
]
# UG585: "Large slave interface read acceptance capability in the range of 14 to 70 commands"
inflight_cnt = Signal(max=128)
self.sync += inflight_cnt.eq(inflight_cnt + (ar.valid & ar.ready) - (r.valid & r.ready))
self.comb += [
self.source.stb.eq(r.valid),
r.ready.eq(self.source.ack),
self.source.data.eq(r.data),
self.source.eop.eq(eop_pending & r.last & (inflight_cnt == 0))
]
class DMAReader(Module, AutoCSR):
def __init__(self, membus, enable):
aw = len(membus.ar.addr)
alignment_bits = log2_int(AXI_BURST_LEN*len(membus.r.data)//8)
self.submodules.wb_reader = AXIReader(membus)
self.source = self.wb_reader.source
# All numbers in bytes
self.base_address = CSRStorage(aw, alignment_bits=alignment_bits)
# # #
enable_r = Signal()
address = self.wb_reader.sink
assert len(address.address) == len(self.base_address.storage)
self.sync += [
enable_r.eq(enable),
If(enable & ~enable_r,
address.address.eq(self.base_address.storage),
address.eop.eq(0),
address.stb.eq(1),
),
If(address.stb & address.ack,
If(address.eop,
address.stb.eq(0)
).Else(
address.address.eq(address.address + 1),
If(~enable, address.eop.eq(1))
)
)
]
class DMA(Module):
def __init__(self, membus):
self.enable = CSR()
flow_enable = Signal()
self.submodules.dma = DMAReader(membus, flow_enable)
self.submodules.slicer = RecordSlicer(len(membus.r.data))
self.submodules.time_offset = TimeOffset()
self.submodules.cri_master = CRIMaster()
self.cri = self.cri_master.cri
self.comb += [
self.dma.source.connect(self.slicer.sink),
self.slicer.source.connect(self.time_offset.sink),
self.time_offset.source.connect(self.cri_master.sink)
]
fsm = FSM(reset_state="IDLE")
self.submodules += fsm
fsm.act("IDLE",
If(self.enable.re, NextState("FLOWING"))
)
fsm.act("FLOWING",
self.enable.w.eq(1),
flow_enable.eq(1),
If(self.slicer.end_marker_found,
NextState("FLUSH")
)
)
fsm.act("FLUSH",
self.enable.w.eq(1),
self.slicer.flush.eq(1),
NextState("WAIT_EOP")
)
fsm.act("WAIT_EOP",
self.enable.w.eq(1),
If(self.cri_master.sink.stb & self.cri_master.sink.ack & self.cri_master.sink.eop,
NextState("WAIT_CRI_MASTER")
)
)
fsm.act("WAIT_CRI_MASTER",
self.enable.w.eq(1),
If(~self.cri_master.busy, NextState("IDLE"))
)
def get_csrs(self):
return ([self.enable] +
self.dma.get_csrs() + self.time_offset.get_csrs() +
self.cri_master.get_csrs())

View File

@ -14,6 +14,9 @@ from artiq.gateware import rtio, nist_clock, nist_qc2
from artiq.gateware.rtio.phy import ttl_simple, ttl_serdes_7series, dds, spi2 from artiq.gateware.rtio.phy import ttl_simple, ttl_serdes_7series, dds, spi2
import dma
class RTIOCRG(Module, AutoCSR): class RTIOCRG(Module, AutoCSR):
def __init__(self, platform, rtio_internal_clk): def __init__(self, platform, rtio_internal_clk):
self.clock_sel = CSRStorage() self.clock_sel = CSRStorage()
@ -81,9 +84,14 @@ class ZC706(SoCCore):
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, rtio_channels) self.submodules.rtio_core = rtio.Core(self.rtio_tsc, rtio_channels)
self.csr_devices.append("rtio_core") self.csr_devices.append("rtio_core")
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True) self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
self.csr_devices.append("rtio") self.csr_devices.append("rtio")
self.csr_devices.append("rtio_dma")
self.comb += self.rtio.cri.connect(self.rtio_core.cri) self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.rtio.cri, self.rtio_dma.cri],
[self.rtio_core.cri])
self.csr_devices.append("cri_con")
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels) self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj") self.csr_devices.append("rtio_moninj")