README: update instructions

This commit is contained in:
Sebastien Bourdeauducq 2023-04-04 11:19:49 +08:00
parent 2802938702
commit 93423dd145
1 changed files with 2 additions and 2 deletions

View File

@ -4,8 +4,8 @@ ARTIQ on Zynq
How to use How to use
---------- ----------
1. Install ARTIQ-7 or newer. 1. Install the ARTIQ version that corresponds to the artiq-zynq version are targeting.
2. Select the latest successful build on Hydra: https://nixbld.m-labs.hk/jobset/artiq/zynq 2. Select the latest successful build on [Hydra](https://nixbld.m-labs.hk/) for the targeted artiq-zynq version, or use AFWS to obtain firmware binaries.
3. Search for the job named ``<board>-<variant>-sd`` (for example: ``zc706-nist_clock-sd`` or ``zc706-nist_qc2-sd``). 3. Search for the job named ``<board>-<variant>-sd`` (for example: ``zc706-nist_clock-sd`` or ``zc706-nist_qc2-sd``).
4. Download the ``boot.bin`` "binary distribution" and place it at the root of a FAT-formatted SD card. 4. Download the ``boot.bin`` "binary distribution" and place it at the root of a FAT-formatted SD card.
5. Optionally, create a ``config.txt`` configuration file at the root of the SD card containing ``key=value`` pairs on each line. Use the ``ip``, ``ip6`` and ``mac`` keys to respectively set the IPv4, IPv6 and MAC address of the board. Configuring an IPv6 address is entirely optional. If these keys are not found, the firmware will use default values that may or may not be compatible with your network. 5. Optionally, create a ``config.txt`` configuration file at the root of the SD card containing ``key=value`` pairs on each line. Use the ``ip``, ``ip6`` and ``mac`` keys to respectively set the IPv4, IPv6 and MAC address of the board. Configuring an IPv6 address is entirely optional. If these keys are not found, the firmware will use default values that may or may not be compatible with your network.